Drum Sander

General Info:


Manual


Usage:

Make sure the fan underneath the drum sander is plugged in. This keeps the conveyor motor cool.
This is the control panel for the drum sander. 
The right two buttons control the conveyor belt. 
The left buttons control the sander drums. 
The middle knob sets the speed of the conveyor belt.
When placing workpiece in sander, you want it start on the first pass with the roller just barely making contact with the top of the surface. 
Keep your hand on the height wheel as you are feeding wood through. The goal is to keep the amp-meter in the green to yellow range. 
If it goes into red, lower the conveyor belt to take pressure off the machine. 

Maintenance:

How to Change the Sandpaper on the Drum Sander

Step 1) Cut the sandpaper to fit

Step 2) Put Sandpaper on Drum Sander

Step 3) Taping the Sandpaper to the Drum