How to clean and assemble Medal Holders

Peel the masking from the lasered insert.

Use vinegar to clean the burnt laser marks from the insert.

*On white inserts after you use the vinegar, use alcohol to clean the yellow left behind. This makes is easier for the white paint to cover it up. Alcohol can give the surface a different texture so use sparingly.

If there are any wood specks stuck on insert, wet with vinegar and then use razor blade to scrape off. Vinegar seems to loosen the wood.

If you need to touch up paint, use a q-tip and corresponding color to touch up paint.

Look for any white areas on edges of insert and fill those in with a black sharpie.

Look at the order form to find what color base they have ordered. Find the appropriate base under the table in the crate. Right side is 10" and the Left side is 20".

This order wants Kona.

Place medal holder in jig and and place insert in medal holder groove. Clamp down.

Use 3 screws to screw insert to medal holder.

Screw the middle screw in first then do the outer ones.

Check top of medal holder to see if there are any wood fixes that need to me made. If so use a sharpie and color in then wipe with your finger to remove the shine.

Use the silver sharpie for grey bases.

Use Brown first then black on top for kona bases.

Use Gold for walnut bases.

Place order form between 2 letters to keep product and order form together.