Assembling Wine Stave S'mores Marshmallow Roasting Sticks
Batch Size: 20
Time Standard: 30 minutes
Strip the existing plastic handle from the sticks using a knife. Always cut away from yourself. Cutting the non-knobby side is easier.
Once you cut away the strip, the handle will easily come off.
next grab some skinny masking tape and the plugs for the smore sticks and center it in the tape and tape it over the hole at the end and fold down all sides
Pump a squirt of hot glue in the handle.
Push the stick into the handle.
How to Drill and Tie leather cord:
This step can be done before or after putting the smore stick together.
Grab a Drill and a xx" Size drill bit. Same as the wine tray drill bit. Drill a hole through the side of the handle at the end.
Next grab the thin leather cord and a yard stick or tape measure and cut 15" strips for however many you are making.
Slide the cord through the hole and put the ends together and make a loop, put the ends through the loop and pull it tight, making sure to try and keep the knot at the end
Next Stop: Fulfillment Assembly 1